ADAS Calibration Laser Floor Markers
ADAS Reusable Square Rubber Laser Reflective Floor Markers
Made out of 100% Solid Rubber 1/4" Thick (6.35mm) Measure 2 3/4" x 2 3/4" (70mm x 70mm)
Use these instead of tape or chalk to mark the required positions on the floor when setting up your ADAS Calibration Equipment.
Set of 8 ADAS Laser Floor Markers (8Pcs Total)
Reusable
Lightweight - Yet heavy enough to stay in place on the floor (even when it's damp or wet)
Coated in visible white reflective paint for easy to see laser markings
Easy to find center line as each piece is V cut both ways
Center of Marker is marked clearly (See Plumb Bob Pictures & 5 Line Laser Pics)
Easy to make measurements with tape measure by lining up end of tape measure or distance needed with bottom of V cut
45 Degree Angle on all 4 sides for visibility of laser line when adjusting centerline (Especially when adjusting centerline under the vehicle.)
Can be used with Reflective Board
Made in USA
We have been doing automotive glass for 30+ years. About 18 months ago we decided to take the plunge into ADAS Calibrations and bought an Autel MA600. One of the best investments we ever made!
To make a long story short - Over the past year after really diving into the ADAS Calibrations, we have developed and now manufacture these rubber floor markers that you can use over and over again. They are very durable, light weight, easy to store and simple to use. No more dirty floor that the tape won’t stick too, no more chalk lines to mark and remove, no more having to buy tape and best of all we have to say these markers have saved us a lot of setup time per job!
They literally pay for themselves in very little time and are an inexpensive investment at $99.99 for 8pcs. Compared to all the other ADAS Equipment Pricing...This is a STEAL!
Note: Due to this being a rubber product when you get your 8 pack you may notice minor differences in size, 45 degree angle and white reflective color. None of these things will effect the use.
We guarantee you won’t regret investing in these!
ADAS Reusable Square Rubber Laser Reflective Floor Markers
Made out of 100% Solid Rubber 1/4" Thick (6.35mm) Measure 2 3/4" x 2 3/4" (70mm x 70mm)
Use these instead of tape or chalk to mark the required positions on the floor when setting up your ADAS Calibration Equipment.
Set of 8 ADAS Laser Floor Markers (8Pcs Total)
Reusable
Lightweight - Yet heavy enough to stay in place on the floor (even when it's damp or wet)
Coated in visible white reflective paint for easy to see laser markings
Easy to find center line as each piece is V cut both ways
Center of Marker is marked clearly (See Plumb Bob Pictures & 5 Line Laser Pics)
Easy to make measurements with tape measure by lining up end of tape measure or distance needed with bottom of V cut
45 Degree Angle on all 4 sides for visibility of laser line when adjusting centerline (Especially when adjusting centerline under the vehicle.)
Can be used with Reflective Board
Made in USA
We have been doing automotive glass for 30+ years. About 18 months ago we decided to take the plunge into ADAS Calibrations and bought an Autel MA600. One of the best investments we ever made!
To make a long story short - Over the past year after really diving into the ADAS Calibrations, we have developed and now manufacture these rubber floor markers that you can use over and over again. They are very durable, light weight, easy to store and simple to use. No more dirty floor that the tape won’t stick too, no more chalk lines to mark and remove, no more having to buy tape and best of all we have to say these markers have saved us a lot of setup time per job!
They literally pay for themselves in very little time and are an inexpensive investment at $99.99 for 8pcs. Compared to all the other ADAS Equipment Pricing...This is a STEAL!
Note: Due to this being a rubber product when you get your 8 pack you may notice minor differences in size, 45 degree angle and white reflective color. None of these things will effect the use.
We guarantee you won’t regret investing in these!
ADAS Reusable Square Rubber Laser Reflective Floor Markers
Made out of 100% Solid Rubber 1/4" Thick (6.35mm) Measure 2 3/4" x 2 3/4" (70mm x 70mm)
Use these instead of tape or chalk to mark the required positions on the floor when setting up your ADAS Calibration Equipment.
Set of 8 ADAS Laser Floor Markers (8Pcs Total)
Reusable
Lightweight - Yet heavy enough to stay in place on the floor (even when it's damp or wet)
Coated in visible white reflective paint for easy to see laser markings
Easy to find center line as each piece is V cut both ways
Center of Marker is marked clearly (See Plumb Bob Pictures & 5 Line Laser Pics)
Easy to make measurements with tape measure by lining up end of tape measure or distance needed with bottom of V cut
45 Degree Angle on all 4 sides for visibility of laser line when adjusting centerline (Especially when adjusting centerline under the vehicle.)
Can be used with Reflective Board
Made in USA
We have been doing automotive glass for 30+ years. About 18 months ago we decided to take the plunge into ADAS Calibrations and bought an Autel MA600. One of the best investments we ever made!
To make a long story short - Over the past year after really diving into the ADAS Calibrations, we have developed and now manufacture these rubber floor markers that you can use over and over again. They are very durable, light weight, easy to store and simple to use. No more dirty floor that the tape won’t stick too, no more chalk lines to mark and remove, no more having to buy tape and best of all we have to say these markers have saved us a lot of setup time per job!
They literally pay for themselves in very little time and are an inexpensive investment at $99.99 for 8pcs. Compared to all the other ADAS Equipment Pricing...This is a STEAL!
Note: Due to this being a rubber product when you get your 8 pack you may notice minor differences in size, 45 degree angle and white reflective color. None of these things will effect the use.
We guarantee you won’t regret investing in these!
